Videovox Pro LNS series Instrukcja Użytkownika Pobierz pdf (Strona 60)

60

SYSTEM INFORMATION

CAMERA PARAMETERS

ZFUNCTION SETTING

ALARM SETTING

DEVICE CONTROL

EXIT

PRESET

AUTO SCAN

TOURING

ZPATTERN

PRIVACY MASKING

BACK

EXIT

9.4.2.3 Pattern setup

PELCOD protocol pattern setup：

1. Pattern setup

(1) In DVR PTZ control menu, call preset 28 or

95. System pops up dome menu, and dome enters

menu scan. Click page switch button, system

enters PTZ control page. Up/down/left/right keys

become menu direction keys, icon near the

IRIS becomes confirm button. Move the cursor

down to highlight FUNCTION SETTING, then

click confirm (icon near the IRIS). System

now goes to function setup menu

(2) In function setup menu, you can set preset,

auto scan, touring, pattern. Highlight AUTO

SCAN and click confirm button. The dome now is

ready for you to set pattern.

(3) PATTERN NO：

Move cursor to highlight “pattern no” and use

left/right keys in dome PTZ control interface to

adjust value. The value ranges from 001 to 005.

PROGRAM START:

Move cursor to highlight “program start” and then

click confirm button (icon near IRIS). Now

system pops up OK to alert you pattern setup

begins. There is a sun icon below screen.

(4) Repeat procedure 2 to enter dome pattern

setup. Move cursor to highlight “program stop”

and click confirm button (icon near IRIS).

Now you have stopped patterning and the sun icon

below screen disappears.

Move cursor to highlight “run”( or “stop”) and

click confirm button (Icon near IRIS) to begin

(or stop) scanning.

Z

PATTERN

NO

：

001

PROGRAM START

PROGRAM STOP

RUN

STOP

BACK

EXIT

1 2 ... 55 56 57 58 59 60 61

Komentarze do niniejszej Instrukcji

Brak uwag